Home
About Us
Kraiburg Cow Comfort
Kraiburg People Comfort
Ventilation and Cooling
Stalls, Gates and Chutes
Parlor Systems and Walls
Feeding / Bedding Equipment
Manure Handling Equipment
Impact Silage Packer
Contact Us

Find Us on Facebook

Stalls, Gates, & Chutes

 

 

Hanging Free Stall System

The Hanging Free Stall System features heavy-duty construction.

Important information for ordering:

  • Beam Support Kits include two U-Bolts and bolts, nuts and washers for fastening to a wood post.
  • Free Stall Hanger Kits include stall mount, beam clamp, two U-Bolts and stall loop fasteners.
  • Galvanized beams come with one swagged end.
  • Beams must be supported a minimum of every 12’.
  • Beams should be supported on each end except where it is less than 4’ from the nearest post. Use additional Beam Supports as needed.

Free Stalls for Cows and Young Stock

Wide Loop Stall

 

Arrow Style Stall

 

Dog Bone Stall

Y2K Style Stall

All stall loops are made from Galvanized Steel Tubing. We offer three different thickness: 2 3/8", 1.90" and 1.66".

Custom stalls are available. All custom orders may be subject to set up charges and a down payment.


Duralock Self Locking Panels

  • Hot dipped galvanized construction for a long useful life.
  • Heavy duty construction includes:
    • 2” square tubing top and bottom
    • 11 gauge swing arms
  • Cow friendly 17” top opening and 7 3/4” when closed.
  • Simple design.
  • Down cow release
  • Available in 8', 10’ and 12’ lengths.
  • Rubber bumpers reduce noise.
  • Affordable headlock system.

Adjustable Length Gate Kits

  • Are hot dipped galvanized after being welded. Size is for the raw opening where the gate is to be installed (be sure to account for any posts that are not yet in place).
  • Gate height is 50”. Three Bar gate height is 36’. (bottom bar to top bar).
  • The square tubing hinge end is separate and is welded on after horizontal bars are cut to length.
  • Includes chain latch and threaded gate hinge
  • Custom-made gates are also available

ST6200 and ST6210 Suspended Tie Stalls

  • 2 3/8” x 11 gauge galvanized tubing for the loop and upright standard. (1.66” tubing optional)
  • All welded construction
  • 1.66 x 11 gauge filler bars (ST6210).
  • Heavy duty welded construction with welded cross clamps.
  • Heavy duty control rail clamps standard (rail not included).
  • 2 7/8” x 6 gauge rust shield.
  • Tie chain with rail clamp and heavy snap.
  • 63” overall length.

ST6520, ST6530 and ST6540 Tie Stalls

  • 1.66” 11 guage tubing standard
  • All welded construction except ST6520.
  • Heavy duty control rail clamps standard (rail not included).
  • Tie chain with rail clamp and heavy snap.

Zimmerman Hoof Care Chutes - MODEL HCC2008

The 2008 Hoof Care Chute model features an innovative rear gate design while retaining all the advanced features of earlier models. Our well-engineered hoof trimming chutes are not an expense, but an investment that will pay dividends to those who take a proactive role in managing the health of their cows.

Standard Features and Specs:

  • Hoof trimming and Veterinarian work done effectively & efficiently!
  • Zimmerman makes a high quality chute with decades of experience.
  • Extra-tough powder coated finish
  • Front & back belly straps, automatic head gate, anti-skid floor, and side access panels.
  • Front and back belly straps for animal stability
  • Zimmerman automatic locking head gate
  • Anti-skid Rumber™ floor for safe footing
  • Picks up feet safely for easy hoof trimming and care
  • Four indendently opening Side Panels (2 high, 2 low)
  • Durable powder coated steel frame
  • Dimensions: Width - 38", Length - 84", Height: 80"
  • Many more options available!

Click here to view full brochure

 

AGROMATIC INC.- Quality Equipment for the Dairymen's Future.
N6989 Rolling Meadows Dr. - P.O. Box 29 - Fond du Lac, WI 54936-0029
(920) 922-1970 - (800) 800-5824 - Fax (920) 922-1750